Week 10 - Some Punchlist Stuff

FYI - there's some photos at the bottom of this post.

MONDAY

Monday the architect sent his version of the punchlist out to the builder. It was a little more generic than ours, and seemed to leave off a few items. But we would be in pretty good shape if they got through it all.

The on-site guy for the builder sent an email saying that the VP co-owner wanted to go over the list with us. The architect offered to hold the meeting with them, which was our preference. They scheduled a meeting for Tuesday morning.

TUESDAY

It sounded like they intended to start paint Tuesday morning - you would think they'd wait on bringing out their subs to do punchlist stuff until AFTER they reviewed the punchlist with the architect, but apparently not. We sent them an email listing some items of concern - paint flaking off when removing painter's tape, some bare wood on top of door frames not painted. A few other things that we mentioned included that the microwave had a pretty bad tilt to it, and that the range wasn't sliding all the way into the space - the counters were a little to narrow and the screws on the side were white from countertop material when they tried to force it in.

They cleaned up the vent pipes in the laundry area some, though there was still some debris sitting in the tops of the collars.

The builder mentioned that they were unable to find a cat door that would fit in the pocket door. The problem is that there really can't be much in the way of trim sticking out, else it would hit the frame every time you tried to slide the door open. They asked us to look. I had about as much luck as they did. There was actually one place that said they could modify one of their doors to work. Of course, it was a $150 cat door. We decided to pass.

WEDNESDAY

The cabinet guys were supposed to come out to replace the doors that were off color, but they didn't make it. One of the things that keeps bugging us is that the builder always implies that we asked the cabinet guys to replace those doors - it was the cabinet guys who suggested it. And every time it comes up we tell them it was the cabinet shop guys. It just seems like we're getting set up for something.

The painters came out and did some of the punchlist items, but didn't really fix all of them. They didn't fix the columns on the end caps the way that the architect requested, and the seam is still a bit visible. Plus they didn't paint all the bare wood on top of the door frames, and the new window sill looks a little rough - literally. The also painted the vent pipes in the laundry room, which looked nice. It looked like there were puddles of paint on the tops of the pipe joints - I guess it was easier to glob a bunch of paint in there instead of actually cleaning and painting them?

They had reinstalled the microwave to correct the tilt, but it was still pretty noticeable. Maybe it wouldn't be a problem if we never were to cook hot dogs in the microwave (I can just picture them rolling to the front of the microwave and staying there). They seemed to imply that they just couldn't get it any better than that. Doesn't seem like a good answer.

We also noticed that the microwave was venting into the kitchen, instead of up through the vent piping. Seems like a lot of problems for supposedly professional installers.


THURSDAY

A few times earlier in the week the builder had said that the trades would be working most of the day on Thursday. Last week wife had made plans to have a friend come by the house in the morning, but then cancelled the plans when we heard the work schedule.

Of course, no one showed up in the morning to work, and there was no message to tell us they wouldn't be working.

In the afternoon the appliance guy came by to look at the microwave trim piece that was damaged, so they could order a replacement.

The builder's on-site guy was talking to his boss, and it sounds like they don't think they can get the fridge in further, to fit flush with the cabinetry. My wife pointed out some of the paint issues with the window sill, but they hadn't realized there were still issues. Ditto on the tile work - when they did some repairs the grout color was darker, plus there's a few areas where it doesn't quite look right.

They confirmed that when the microwave was installed there was a piece that wasn't installed properly to allow for external venting.

The cabinet guys didn't make it out.

FRIDAY

The cabinet shop came out and installed the remaining door fronts, and they look REALLY nice. They made some drawer front alignments, but there's still a handful that are a little off and need to be adjusted.

The appliance guys changed the venting on the microwave. The first time we used it scared the crap out of us since it was so loud! We were freaked out and were looking online for reported issues with this microwave being particularly loud. This thing was literally as loud as a vacuum cleaner. You had to raise your voice when talking with someone else in the kitchen. After some investigation, it appears that they didn't really take care of resealing the venting when swapping the piece to make it vent externally. There are huge air gaps in the piping, which is probably where most of the noise is coming from. Seriously, is it that hard to check your work, boys?

The good thing is that, whether on purpose or not, they got the microwave pretty level. It may not be 100% level, but visually it looks level, and things don't seem to roll around anywhere nearly as easily as they did before.

The countertop guy came out to trim the counters, to allow the range to sit properly. It kinda looks like they cut chunks out of the counter - not exactly the slight grinding that I was expecting. If everything is seated properly it may be OK. But it is not seated properly - it's actually a little crooked. One of the rear feet (that we told them about before) is at an angle, and the trim piece in the back is clearly closer to the wall on one side than the other. Also, if you look at the back of the range you see the bare wall where they stopped tiling. Seems they should have put in another row.

They built some small collars around the floor where the vent pipes go through the laundry room floor - this was one of the things the architect suggested, and we asked them to do in exchange for not making them redo the cabinet door hardware. Sadly, it only lasted a few hours, as it broke apart by nightfall... And those puddles of paint on the joints in the vent pipes - cracking.

Responding to requests from our legions of loyal readers, there are a handful of pictures below.


View of the overall kitchen, from the living room area.


The wall of windows, and the cool trim boards around them.


Wall with range and microwave.


Back door, in its new location. Still waiting on hardware (and screen door) - what you see is from our old door.


Pantry cabinets and the laundry room.


Painted vent pipes in laundry area.

And now some of the stuff that's not so good.


Check out the tile work in the corner - not aligned, different orientations, etc. You can't really see in the photo, but the grout color there is a little different, too.


This is where the back of the range doesn't quite meet the wall. And where it comes close, there's no tile.


Busted up collar on one of the vent pipes. I'm not sure what they used to build it, but I don't think it was what the architect suggested.